Antminer T9+ vnish firmware

How to install

ATTENTION: Firmware is working only with Antminer T9+ !!!

If you see the message: can not find signature when you flash the asic with VNISH firmware you need to take off bitmain software protection. This message means that your asic has BITMAIN firmware 2019 year that has overwrite protection

If you have BITMAIN firmware june 2019 or earlier you can remove the protection using the “signature” file and then flash vnish firmware. if you have firmware from July 2019 or later, then installing our firmware is only possible via the SD card (all files you can download from this page) You can check the firmware version in the System – file system version

DOWNLOAD SIGNATURE TAKE OFF SIGNATURE TAKE OFF
DOWNLOAD T9+ SD IMAGE 3.9.0 DOWNLOAD VNISH T9+ SD IMAGE 3.9.0
DOWNLOAD FIRMWARE MANUAL FIRMWARE MANUAL
DOWNLOAD ANTIVIRUS MANUAL DOWNLOAD ANTIVIRUS MANUAL
DOWNLOAD FIRMWARE FOR T9+ ANTIVIRUS VERSION 3.9.0 DOWNLOAD VNISH FIRMWARE FOR ANTMINER T9+ (ANTIVIRUS VERSION 3.9.0)

Modes antminer T9+ firmware

POPULAR MODES VNISH FIRMWARE ANTMINER T9+:
14 TH/s – 1500 watt (107 watt-TH/s) 
12 TH/s – 1250 watt (104 watt-TH/s) 
11 TH/s – 1100 watt (105 watt-TH/s) 
10 TH/s – 990 watt (99 watt-TH/s)

STOCK BITMAIN FIRMWARE ANTMINER T9+:
10,5 TH/s – 1330 watt (127 watt -TH/s)

Version changes in the antminer s9+ vnish firmware release

Release 3.9.0

  1.  We added a unique PROTECTION !!! On the hardware level against Antbuild and all similar viruses forever!!
  2.  Added the ability to disable hash boards
  3.  Added hotel fee option (where you can redirect part of the hashrate to pay for electricity, equipment colocation or pay for miners maintenance).
  4.  Added the ability to set up voltage  for hashboard 7.9 volt 
  5.  Added option : LPM mode (automatic reduction of voltage during mining)
  6. Changed the visual display of hash boards (it’s easier to find the hash board in the miner)

Release 3.8.6

  1. Overall stability)));
  2. Added the ability to choose between a complete restart of the ASIC and the restart of only the cgminer in Autotune section;
  3. In addition to the automatic system for viruses checking we Added manual checking and disinfection in the Security section, including the new AntBuild virus;
  4. Fixed connection to the monitoring Anthill.farm;
  5. Added the Find Miner function to the config multiplier to search for more miners at once;
  6. Changed the format of downloading the log file in txt;
  7. the new function “sleep mode” when it is turned on, the mining stops and the fans drop to minimal. The function is available in the config multiplier;
  8. Fixed problem with DevFee error exit.

In release 3.8.5

  1. Overall stability;
  2. Improved and changed the method of connecting to pools;
  3. Added the function of mass password change in the config multiplier
  4. Added the function that can mass change Ssh port and mass shutdown of Ssh in the config multiplier
  5. Optimize the size of the firmware.

Release 3.8.4

  1. optimization of the source code;
  2. improvement of the total stability;
  3. the bug when on some batches ASIC couldn’t connect to the pool, was fixed;
  4. the bug when ASIC could stutter during auto-tuning or timer expiration, was fixed;
  5. installation and connection to Anthill service was fixed;
  6. optimization of the size of the firmware file, that could lead to the error “No space left on device”;
  7. the way of treatment of the new virus, that ruins record files and doesn’t let braid even by Ssh, was improved;
  8. the new portion (security) in which was added:
    a) on/off of Ssh server;
    b) change of the port of Ssh server.

Release 3.8.3

  1. total stability;
  2. code optimization;
  3. “find the miner” function;
  4. portion DevFee, where one can choose the most suitable server in ping and stability;
  5. function of distribution of the selected server DevFee in the configurator multiplier;
  6. the bug, when miner could go down when overloading during the chips configurations, was fixed;
  7. BTC Tools version 1.2.1.1 support;
  8. time synchronization «ntpd» when detected and treated the virus nightswitcher was fixed;
  9. start and restart of cgminer has been fixed and impoved (on some miners it could reload two times running);

In release 3.8.1

  1. total stability;
  2. team improvement of Anthill.farm service;
  3. team improvement of the service MinerStatBox-> MinerStatsLite;
  4. ONLY ON THE USERS’ REQUESTS THE CONSUMPTION OUTPUT WAS ADDED (inaccuracy is 50-100W);
  5. opportunity to set the minimal frequency in Auto Tune (200);
  6. HW was added into the cloning.
  7. opportunity to disable the timer (stage 3) in profile was added;
  8. temperature defining was fixed;
  9. automatical detection and treatment of the virus nightswitcher;

Release 3.8.0

  1. total stability;
  2. AsicBoost improvement;
  3. configurator multiplier improvement (during the configuration process there was added the opportunity of:
    A) leave the chips without changes;
    B) leave the settings for blades and voltage without changes;
    C) leave the profile without changes;
    D) transfer massively the function of bug fixing when connecting DevFee;
    E) transfer massively the settings of the silent mode;
    F) transfer massively the settings of temperature retention;
  4. fan quiet mode of miner starting was added (at our own risk);
  5. output of information as to the disabled fans was made in our own log;
  6. NiceHash usage bags were fixed and #xnsub was improved;
  7. fans checking was carried out and the limit for 500-800 rpm was added(it happened that the back fan was disabled, but it was rotating due to the stream from the front fan at the minimal velocity);
  8. output of the information when starting was remade, as well as the immersion mode (the token in miner status in the form of a snow-flake, and the rotations are shown when the fans are not removed in the liquid);
  9. spelling errors and rates in the WEB interface were corrected;
  10. profiles descriptions with approximate consumption AB-OFF / AB-ON and output of the overclocking information or Down Voltage were improved;
  11. 4 new profiles were added at 18.5, 19, 19.5, 20 th;
  12. Spanish language was added;
  13. Linux libraries were updated.

Release 3.7.7

  1. total stability;
  2. libraries for Hive OS were updated;
  3. function -1 for HW was added;
  4. #xnsub was added (stratum.antpool.com:3333#xnsub);
  5. opportunity to set reboots to trigger limits when the boards disable(The maximum number of reboots can be set. The counter resets after reboot or power failure);
  6. tuning log was remade, the maximum lines quantity is 20, if more the old records are deleted;
  7. log can be saved in the file;
  8. export of the configuration in multiplier was added (to improve overclocking, down voltage, profile usage through BTC Tools);
  9. new profile of the frequency of 700W 8.6 (14.7тх) was added;
  10. monitoring integration Anthill.farm was added (see the monitoring portion);
  11. fans work and temperature sensors were improved;
  12. virus destruction was improved, and the chance of the infection of the version 3.7.6 was avoided;
  13. bug of displaying online voltage in the absence of boards was fixed;
  14. log was improved;
  15. new profile in the configuration multiplier was added;
  16. multiplier work was fixed and patch for BTC Tools was made;
  17. restart was removed from the menu.