How to install

Do you have more than 1000 ASICs?    Get a DEV FEE discount!

Select and download the Vnish firmware for your model and read the installation guide using Hashcore Toolkit

After rebooting a miner with a CVitek control board running Vnish firmware, the stock firmware will return. To prevent this, the Hashcore Toolkit must be running and connected to the miner network, so that Vnish remains active after a reboot or power-off.

Standard types of control boards: Xilinx ( SD slot outside ) , beagle bone BB version ( SD slot is located inside on the control board) , Amlogic ( only micro usb slot is located outside ), CVitek ( SD slot outside ), check the file types of control boards

Modes antminer S21, T21 firmware

Version 1.3.5

⌨️ Expanded Miner & Hardware Support:
• New Models: Added support for Antminer U2L9H and Antminer S21++
• Xilinx Support: Added support for the Antminer S19-126 on Xilinx control boards.
• New PSUs: Added support for PSU models 0x67 and 0xc5.

⚙️ New Features & Enhancements
• Maintenance Tab UI: Moved Backup, Restore Backup, Reset to Default Settings, and Rollback to Stock functionalities to a dedicated, unified Maintenance tab in the web interface.
• Offline Mining: Fixed and stabilized the Offline Mining operational mode.

🔧 Bug Fixes & Refinements
Hardware Detection:
• ASIC Auto-Detection: Fixed model detection issues for Antminer S19 Pro(114 chips), T19, S19, S19 Pro Hydro(120), Antminer S21 sub-model BHB68603P.

📈 Tuning & Presets:
• Autotune Improvements: Fixed and optimized autotuning algorithms on several miner models.
• Preset Naming: Fixed incorrect preset names for Antminer S21e Hydro, T19, and S19j+.
• Preset Removal: Presets exceeding 346 TH have been removed for the Antminer S21 Hydro.
System & Logs:
• Xilinx Log Cleanup: Fixed the “remove stock logs” routine on Xilinx control boards to ensure clean log deletion.

Version 1.2.6

🆕 Extended miner support

• New supported Antminer models:
• T19 Pro Hydro, S19j XP, S19e XP Hydro, S19 Pro Hydro (120 chips)
• S21 XP, S21+, S21+ Hydro, S21 Immersion, S21 Pro,
• S21 XP Hydro, S21 XP Immersion, T21 with Xilinx and L9
• Added Antminer submodel support for:
• S19 XP: BHB56802
• S21 Hydro: HHB68601, HHB68502, HHB68503
• T21: BHB68701-
• S21: BHB68606, BHB68603P, BHB68603-

⚙️ New features and improvements

• Added the ability to edit configured presets
• Chinese language is now available in the dashboard
• New detailed power consumption chart
• Displays miner and hashboard power consumption from presets (for models without a built-in wattmeter in the power supply)
• Water temperature widget for Antminer S19 Pro Hydro and S19 Pro Plus Hydro (inlet/outlet)
• Miner initialization: fast pause during initialization
• Power supply temperature monitoring support
• Automatic preset reconfiguration after repeated “Chain break detected” errors
• Comprehensive error system with detailed error codes
• Updated voltage limits for Antminer T21
• Automatic shutdown on any chain error for models without PIC controllers
• Charts are now saved after reboot
• Fixed unexpected miner crash

🔧 New configuration options

• Preset switching options:
• Ignore fan speed and automatic upper preset downgrade based on temperature
• Chip regulation: available for x21 series (except S21 Pro)
• Sensor handling:
• Ability to ignore chip temperature sensors (Antminer L9, Antminer S21, Antminer T21, Antminer S21 Imm, Antminer S21 Hydro)
• Ability to skip broken temperature sensors
• Startup control:
• Configurable delay before mining starts (reduces power spikes at startup)
• Configurable minimum number of working hashboards required to start mining

🔧 Bug fixes

• Fixed random EEPROM corruption
• Fixed pool configuration loss during abrupt power-off
• Fixed dashboard freeze caused by error handling
• Fixed unexpected reset of immersion mode to automatic

⚠️ Removed features

• Hotel Pool and Fees tabs removed

🌡 Preset and temperature control improvements

• Updated preset switch thresholds: RISE at 85 °C and DECREASE at 90 °C
• Added new presets for: Antminer S19j Pro+, S19a, S19 XP, S21
• Fixed presets for: Antminer S19e XP Hydro, S19 (76 chips), S19j Pro, S19 Pro+ Hydro, L7 and S19i

🌬 Fan and cooling improvements

• Added maximum fan speed limit for automatic mode
• Reduced minimum fan speed during pause to 0%
• Increased maximum fan speed to 90% when increasing presets
• Improved fan control logic based on temperature

⚙️ System configuration and behavior

• Restart configurations: maximum restart attempts are now disabled by default (0)
• Time zone:
• Added time zone handling for Cvitek
• Full reboot is now required when changing the time zone
• EEPROM reading: accelerated on all boards except XIL
• Default support: for miners without EEPROM, a default board model is assigned
• Logging:
• Logs are not preserved after reboot on Cvitek boards
• Chip ID is displayed in logs during overheat events

🌍 User experience (UX) and interface improvements

• The dashboard now automatically detects the system/browser language on first launch
• Various UI and UX improvements to enhance usability